# Robot working with machine tending

**URL:** <https://forum.visualcomponents.com/t/robot-working-with-machine-tending/5377>\
**Category:** Robot Programming\
**Created:** [August 11, 2023, 10:39am UTC](https://forum.visualcomponents.com/t/robot-working-with-machine-tending/5377 "2023-08-11T10:39:02Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![afina](https://forum.visualcomponents.com/letter_avatar_proxy/v4/letter/a/3e96dc/32.png) [@afina](https://forum.visualcomponents.com/u/afina)\
**Post date:** [August 11, 2023, 10:39am UTC](https://forum.visualcomponents.com/t/robot-working-with-machine-tending/5377/1 "2023-08-11T10:39:02Z")

</div>

A robot is working with a ProMill.  
During the first process, the machine will automatically open and close the door, but during the second process, the machine can not automatically open and close the door.  
How to fix it?  
My software version is 4.0. It’s too old.  
[ex\_2.vcmx](https://forum.visualcomponents.com/uploads/short-url/4xpxTD6MjvFYRKx3nFscP6mqetQ.vcmx) (1.5 MB)
