# Robot arm moving through FIFO rack when placing part on sink

**URL:** <https://forum.visualcomponents.com/t/robot-arm-moving-through-fifo-rack-when-placing-part-on-sink/9312>\
**Category:** Process Modeling\
**Created:** [May 18, 2026, 1:52pm UTC](https://forum.visualcomponents.com/t/robot-arm-moving-through-fifo-rack-when-placing-part-on-sink/9312 "2026-05-18T13:52:28Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mueller](https://forum.visualcomponents.com/letter_avatar_proxy/v4/letter/m/edb3f5/32.png) [@Mueller](https://forum.visualcomponents.com/u/Mueller)\
**Post date:** [May 18, 2026, 1:52pm UTC](https://forum.visualcomponents.com/t/robot-arm-moving-through-fifo-rack-when-placing-part-on-sink/9312/1 "2026-05-18T13:52:28Z")

</div>

Hi everyone,

I’m experiencing an issue with collision avoidance in my simulation and hoping someone can point me in the right direction.

**Setup:**

- I have a process where a robot delivers parts to a sink
- The sink is placed inside a FIFO rack (standard component from the eCatalog)
- When the robot places the part onto the sink, the arm passes directly through the FIFO rack structure

**What I’ve tried:**

- Used `excludeObstacle` command via the robot controller → no effect
- Used `PrecisionObstacle` command via the robot controller → no effect

The robot still ignores the rack geometry and moves straight through it.

Any help or suggestions would be greatly appreciated!

Thanks in advance.

 ![Screenshot 2026-05-18 154333](https://forum.visualcomponents.com/uploads/default/original/2X/0/0ab08c23356ed1a28c9c36026a8ac5270ec401e2.jpeg)
