KUKA SIM LINEAR TRACK SPEED MONITOR AND CHANGE

HI,

I Am Working with Kuka Linear Track KL4000 and KR 340 R3400

As per data sheet it should run at 1.5m/sec but in Simulation while tracing two points making only linear position change (A7 0 - 10000m) i can able to see it as 2.3m/sec which makes my cycle time calculation error.

Tried with MADA data change but it is not reflecting

Tried modify the Modeling parameters, still it remains same.

Am using KUKA Sim 4.10

Thanks in advance

Adaikkappan