Transfer Joint through multiple components Forum › Forums › Visual Components 4.0 › Component Modeling › Transfer Joint through multiple components Tagged: export, import, joints This topic contains 1 reply, has 2 voices, and was last updated by Ralle 1 year, 2 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts 30/04/2018 at 15:49 #5631 MarcPotParticipant I’m trying to create a pedestal for robots that can be used on Robot Positioners. The double base export is not a problem, but when I try to do a double joint export it won’t be imported by the robot. The pedestal will import the Positioner Joint, but won’t export it. Is there a way to export imported joints? You need to login in order to like this post: click here 17/05/2018 at 10:20 #5793 RalleParticipant As workaround you could use an abstract interface for exporting/importing the joints. Take a look to a Workpiece positioner. So connect a Robot Positioner as Workpiece positioner. You need to login in order to like this post: click here Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.