Problem with Fanuc Robots

Robot Programming
1

Hello,

I got a problem with the PTP-configuration ( NUT, FUT…) of Fanuc robot . Every time after saving and closing the VC-project, the configuration for all PTP motions are changed , when reopening the Project. So I have to correct them every time.

Is this issue normal?! or am I missing something

Best,

Zicorob

2

Hello Friend ,

You can refer following link for answer .

 

https://forum.diy-robotics.com/hc/en-us/community/posts/360055635312-PTP-configuration-of-Fanuc-robot?page=1#community_comment_360009069131