Copy Link Forum › Forums › Visual Components 4.0 › Component Modeling › Copy Link This topic contains 1 reply, has 2 voices, and was last updated by CETIN 2 months, 3 weeks ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts 25/04/2019 at 11:17 #13931 Captain_FeatureParticipant Hy, is there any way to copy a link in a component with its geometry? If its not possible it would be great! 🙂 Best Regards Attachments:You must be logged in to view attached files. You need to login in order to like this post: click here 25/04/2019 at 11:34 #13934 CETINParticipant Hi, You can either extract link or copy its geometry first and paste it to new one. If you do not extract the link , it won’t transfer it with its geometry and you have do it separately. option 1: extract link and easily you have new link with same geometry . However, if you need copy if same link this won’t help you . option 2: create a new link ( no geometry) set its position and hierarchy and then copy and paste the geometry you want to duplicate. You need to login in order to like this post: click here Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.