# Process Modeling

**URL:** https://forum.visualcomponents.com/c/process-modeling/25.md?page=1

[Latest](https://forum.visualcomponents.com/latest.md) · [Categories](https://forum.visualcomponents.com/categories.md)

**Page:** 2

---

## [Questions about the Process Executor](https://forum.visualcomponents.com/t/questions-about-the-process-executor/9425)

<div class="topic-metadata">

**Author:** [@hans](https://forum.visualcomponents.com/u/hans)\
**Replies:** 1\
**Last updated:** [July 10, 2026, 1:21pm UTC](https://forum.visualcomponents.com/t/questions-about-the-process-executor/9425 "2026-07-10T13:21:18Z")

</div>

I’ve been wondering a few things about the process executor window that maybe someone can clarify. When you open a process, above the actual process statements there’s this empty space. I think I’ve never seen anything…

---

## [PM Global Variables - how to write variables](https://forum.visualcomponents.com/t/pm-global-variables-how-to-write-variables/9426)

<div class="topic-metadata">

**Author:** [@hans](https://forum.visualcomponents.com/u/hans)\
**Replies:** 5\
**Last updated:** [July 10, 2026, 1:14pm UTC](https://forum.visualcomponents.com/t/pm-global-variables-how-to-write-variables/9426 "2026-07-10T13:14:49Z")

</div>

There’s the component PM Global Variables which can be used to create a list of variables that can then used elsewhere in processes. With the GetProperty statement these variables can be accessed in processes. Question…

---

## [How to define the type in the assembly?](https://forum.visualcomponents.com/t/how-to-define-the-type-in-the-assembly/9389)

<div class="topic-metadata">

**Author:** [@Aria](https://forum.visualcomponents.com/u/Aria)\
**Replies:** 7\
**Last updated:** [July 10, 2026, 6:58am UTC](https://forum.visualcomponents.com/t/how-to-define-the-type-in-the-assembly/9389 "2026-07-10T06:58:43Z")

</div>

In the visual component 4.10, there is the interface that allow users to define the product type (see picture below) But I updated it to 5.10, I couldn’t find where can I define/modify the type, could anyone tell me …

---

## [Only one AMR executing tasks](https://forum.visualcomponents.com/t/only-one-amr-executing-tasks/9423)

<div class="topic-metadata">

**Author:** [@Tomasz](https://forum.visualcomponents.com/u/Tomasz)\
**Replies:** 1\
**Last updated:** [July 9, 2026, 4:57am UTC](https://forum.visualcomponents.com/t/only-one-amr-executing-tasks/9423 "2026-07-09T04:57:45Z")

</div>

Hello, I have a model, where need to pick-up and drop-off items either at the gates or from/to conveyor. I created the basic logic with mission controller. With one AMR it works. Every time the mission is triggered, the…

---

## [Physics component to enter process flow](https://forum.visualcomponents.com/t/physics-component-to-enter-process-flow/1915)

<div class="topic-metadata">

**Author:** [@js\_rasmussen](https://forum.visualcomponents.com/u/js_rasmussen)\
**Replies:** 6\
**Last updated:** [July 8, 2026, 1:19pm UTC](https://forum.visualcomponents.com/t/physics-component-to-enter-process-flow/1915 "2026-07-08T13:19:59Z")

</div>

Hi I have modelled a two way physics conveyor and put it in a layout for PLC code testing. My physics feeder in front of the conveyor is programmed to release the products to physics, the conveyor transports the product…

---

## [Advanced feeder excek](https://forum.visualcomponents.com/t/advanced-feeder-excek/9398)

<div class="topic-metadata">

**Author:** [@ChristofPlovier](https://forum.visualcomponents.com/u/ChristofPlovier)\
**Replies:** 5\
**Last updated:** [July 7, 2026, 1:23pm UTC](https://forum.visualcomponents.com/t/advanced-feeder-excek/9398 "2026-07-07T13:23:43Z")

</div>

If I read the batchbook from excel file, the zero values (=0) are skipped, and the data from this line is shifted. Is there a workaround?

---

## [Embodied robot](https://forum.visualcomponents.com/t/embodied-robot/9420)

<div class="topic-metadata">

**Author:** [@Peter0325](https://forum.visualcomponents.com/u/Peter0325)\
**Replies:** 0\
**Last updated:** [July 7, 2026, 8:43am UTC](https://forum.visualcomponents.com/t/embodied-robot/9420 "2026-07-07T08:43:44Z")

</div>

I want to build an embodied model like this, does anyone have any reference cases?

---

## [Pick multiple products from From Conveyor with human resource](https://forum.visualcomponents.com/t/pick-multiple-products-from-from-conveyor-with-human-resource/9406)

<div class="topic-metadata">

**Author:** [@hans](https://forum.visualcomponents.com/u/hans)\
**Replies:** 5\
**Last updated:** [July 6, 2026, 7:45am UTC](https://forum.visualcomponents.com/t/pick-multiple-products-from-from-conveyor-with-human-resource/9406 "2026-07-06T07:45:25Z")

</div>

Question: how to transport with the human resource multiple products from a conveyor into an assembly? Following situation: Conveyor outputs products that are added to a pallet assembly using a human resource. FromCra…

---

## [A product with a random amount of sub-products](https://forum.visualcomponents.com/t/a-product-with-a-random-amount-of-sub-products/8700)

<div class="topic-metadata">

**Author:** [@Korsgaard](https://forum.visualcomponents.com/u/Korsgaard)\
**Replies:** 8\
**Last updated:** [July 2, 2026, 6:58am UTC](https://forum.visualcomponents.com/t/a-product-with-a-random-amount-of-sub-products/8700 "2026-07-02T06:58:38Z")

</div>

I’m creating a feeder that produces trays with subproducts (cylinders) on. i wan’t the cylinders on the tray to vary between 7-12 randomly, but I can’t seem to find out how to change the subproducts value Hope you guys …

---

## [Regarding the issue that Mobile Robot Resource (Multi Layers) is completely unusable](https://forum.visualcomponents.com/t/regarding-the-issue-that-mobile-robot-resource-multi-layers-is-completely-unusable/7499)

<div class="topic-metadata">

**Author:** [@luhan](https://forum.visualcomponents.com/u/luhan)\
**Replies:** 24\
**Last updated:** [June 29, 2026, 4:31am UTC](https://forum.visualcomponents.com/t/regarding-the-issue-that-mobile-robot-resource-multi-layers-is-completely-unusable/7499 "2026-06-29T04:31:41Z")

</div>

Since the release of Mobile Robot Resource (Multi Layers), it has been unable to function properly. I am unsure of the significance of VC officially releasing such a completely unusable component (to meet personal KPIs?)…

---

## [round robin delivery from a feeder](https://forum.visualcomponents.com/t/round-robin-delivery-from-a-feeder/9385)

<div class="topic-metadata">

**Author:** [@DarrenKoi](https://forum.visualcomponents.com/u/DarrenKoi)\
**Replies:** 1\
**Last updated:** [June 26, 2026, 11:13am UTC](https://forum.visualcomponents.com/t/round-robin-delivery-from-a-feeder/9385 "2026-06-26T11:13:23Z")

</div>

I am trying to deliver to three different locations (RPusher\_1, RPusher\_2, RPusher\_3) from a feeder that is producing 7 different parts using the ProductCreator, part 1 x3, part 2 x3, part 3 x3…and so on. I cannot figur…

---

## [Setting Product Properties, Filtering via those Properties](https://forum.visualcomponents.com/t/setting-product-properties-filtering-via-those-properties/6496)

<div class="topic-metadata">

**Author:** [@StopSignSteve](https://forum.visualcomponents.com/u/StopSignSteve)\
**Replies:** 2\
**Last updated:** [June 23, 2026, 9:17pm UTC](https://forum.visualcomponents.com/t/setting-product-properties-filtering-via-those-properties/6496 "2026-06-23T21:17:26Z")

</div>

Hello all, I am trying to filter how various products flow through my processes via using Product Properties/ Component properties. Quick outline of relevant process steps: Random part created and assigned a color + …

---

## [Mission controller does't work](https://forum.visualcomponents.com/t/mission-controller-doest-work/9373)

<div class="topic-metadata">

**Author:** [@Gene](https://forum.visualcomponents.com/u/Gene)\
**Replies:** 1\
**Last updated:** [June 18, 2026, 12:33pm UTC](https://forum.visualcomponents.com/t/mission-controller-doest-work/9373 "2026-06-18T12:33:30Z")

</div>

Hi I don’t know if I miss any settings, but the mission controller is likely not working in the attached layout. The process is pretty simple; products go from 3 feeders to a sink. Below is the mission. Now the pro…

---

## [AMR on a mission stands still](https://forum.visualcomponents.com/t/amr-on-a-mission-stands-still/9370)

<div class="topic-metadata">

**Author:** [@Tomasz](https://forum.visualcomponents.com/u/Tomasz)\
**Replies:** 2\
**Last updated:** [June 17, 2026, 9:25am UTC](https://forum.visualcomponents.com/t/amr-on-a-mission-stands-still/9370 "2026-06-17T09:25:03Z")

</div>

Hello together, enclosed you can find my model, where I try to control the AMR using missions. missions4gates.vcmx (17.4 MB) AMRs tasks: pick up incoming goods (“from conveyor” process node sends a signal as soon as…

---

## [Human worker unloading pallet with layers ( depalletize ) (cylinders + cardboard) – how to implement?](https://forum.visualcomponents.com/t/human-worker-unloading-pallet-with-layers-depalletize-cylinders-cardboard-how-to-implement/9321)

<div class="topic-metadata">

**Author:** [@Maxxn](https://forum.visualcomponents.com/u/Maxxn)\
**Replies:** 10\
**Last updated:** [June 15, 2026, 5:40am UTC](https://forum.visualcomponents.com/t/human-worker-unloading-pallet-with-layers-depalletize-cylinders-cardboard-how-to-implement/9321 "2026-06-15T05:40:55Z")

</div>

I am quite new to Visual Components (currently using the student version) and I am struggling with a task that I could not solve yet. So far, I have created a feeder that generates a pallet with the following structure: …

---

## [Force Robot Transport to use only linear movements in Automatic mode?](https://forum.visualcomponents.com/t/force-robot-transport-to-use-only-linear-movements-in-automatic-mode/9361)

<div class="topic-metadata">

**Author:** [@hans](https://forum.visualcomponents.com/u/hans)\
**Replies:** 2\
**Last updated:** [June 12, 2026, 9:47am UTC](https://forum.visualcomponents.com/t/force-robot-transport-to-use-only-linear-movements-in-automatic-mode/9361 "2026-06-12T09:47:40Z")

</div>

When using robot transports in process modeling and using the Automatic mode without writing any routines, is there any way to force the controller to only use linear movements and avoid joint movements? Problem is t…

---

## [How to define a custom pickup location for Human worker at a Sink/Process Node?](https://forum.visualcomponents.com/t/how-to-define-a-custom-pickup-location-for-human-worker-at-a-sink-process-node/9358)

<div class="topic-metadata">

**Author:** [@Mueller](https://forum.visualcomponents.com/u/Mueller)\
**Replies:** 2\
**Last updated:** [June 12, 2026, 9:14am UTC](https://forum.visualcomponents.com/t/how-to-define-a-custom-pickup-location-for-human-worker-at-a-sink-process-node/9358 "2026-06-12T09:14:32Z")

</div>

Hi everyone, I’m working on a simulation where an AGV delivers boxes to a sink. In the next step, a human worker should unload/pick up these boxes from the AGV. The problem: The human worker always walks to the FlowInR…

---

## [Product will not interpolate or move via transport.](https://forum.visualcomponents.com/t/product-will-not-interpolate-or-move-via-transport/9348)

<div class="topic-metadata">

**Author:** [@tesss2412](https://forum.visualcomponents.com/u/tesss2412)\
**Replies:** 3\
**Last updated:** [June 10, 2026, 12:48pm UTC](https://forum.visualcomponents.com/t/product-will-not-interpolate-or-move-via-transport/9348 "2026-06-10T12:48:47Z")

</div>

I am having issues with a product not moving from node to node. This product is moved via AMR, goes through many processes, then outputs on a conveyor. At this point the AMR is supposed to grab it again to move it to the…

---

## [VC5.0 does not have vehicle behavior?](https://forum.visualcomponents.com/t/vc5-0-does-not-have-vehicle-behavior/9351)

<div class="topic-metadata">

**Author:** [@luhan](https://forum.visualcomponents.com/u/luhan)\
**Replies:** 0\
**Last updated:** [June 10, 2026, 6:11am UTC](https://forum.visualcomponents.com/t/vc5-0-does-not-have-vehicle-behavior/9351 "2026-06-10T06:11:56Z")

</div>

How to implement VC5.0 without Vehicle behavior? Do you have any cases?

---

## [Exclude the Print statement data generated during warmup time](https://forum.visualcomponents.com/t/exclude-the-print-statement-data-generated-during-warmup-time/9340)

<div class="topic-metadata">

**Author:** [@Gene](https://forum.visualcomponents.com/u/Gene)\
**Replies:** 0\
**Last updated:** [June 5, 2026, 5:18am UTC](https://forum.visualcomponents.com/t/exclude-the-print-statement-data-generated-during-warmup-time/9340 "2026-06-05T05:18:11Z")

</div>

Hi all In a Process Node, a Print statement is used to record date, but I don’t need the data generated during warmup time. Is there any way to exclude it? thanks.

---

## [Attach trace to product to show welds](https://forum.visualcomponents.com/t/attach-trace-to-product-to-show-welds/9339)

<div class="topic-metadata">

**Author:** [@hans](https://forum.visualcomponents.com/u/hans)\
**Replies:** 2\
**Last updated:** [June 4, 2026, 6:15am UTC](https://forum.visualcomponents.com/t/attach-trace-to-product-to-show-welds/9339 "2026-06-04T06:15:01Z")

</div>

I’m visualising welds in a welding simulation using the robot trace. How to attach the traces to the currently worked on product so that once TransportOut is done, they remain there in the next steps? Under “Attach To”…

---

## [Bring in all required components, then process assembly in a Process Node](https://forum.visualcomponents.com/t/bring-in-all-required-components-then-process-assembly-in-a-process-node/9338)

<div class="topic-metadata">

**Author:** [@hans](https://forum.visualcomponents.com/u/hans)\
**Replies:** 1\
**Last updated:** [June 3, 2026, 11:06am UTC](https://forum.visualcomponents.com/t/bring-in-all-required-components-then-process-assembly-in-a-process-node/9338 "2026-06-03T11:06:47Z")

</div>

I’m having trouble creating a situation where a worker brings in all required components for an assembly into a process node, then creates the assembly. Example: A stack of 4 products is created and transported out in …

---

## [Best strategy for simulating an ERP-driven assembly](https://forum.visualcomponents.com/t/best-strategy-for-simulating-an-erp-driven-assembly/9337)

<div class="topic-metadata">

**Author:** [@hans](https://forum.visualcomponents.com/u/hans)\
**Replies:** 0\
**Last updated:** [June 2, 2026, 9:01am UTC](https://forum.visualcomponents.com/t/best-strategy-for-simulating-an-erp-driven-assembly/9337 "2026-06-02T09:01:48Z")

</div>

I’m planning a production line simulation and need to decide what would be the best approach to use in case the assemblies are not predefined in the VC process, but arrive from a manufacturing ERP. Scenario: Line is p…

---

## [Import geometry within a component](https://forum.visualcomponents.com/t/import-geometry-within-a-component/9334)

<div class="topic-metadata">

**Author:** [@Jesper](https://forum.visualcomponents.com/u/Jesper)\
**Replies:** 0\
**Last updated:** [May 29, 2026, 7:52am UTC](https://forum.visualcomponents.com/t/import-geometry-within-a-component/9334 "2026-05-29T07:52:03Z")

</div>

Hi all, I keep running into the following issue. I have a component with already lots of work in it (so I dont want to recreate it), and I then want to add or change a geometry within this component. This new geometry i…

---

## [How to implement pick-and-place on the machine?](https://forum.visualcomponents.com/t/how-to-implement-pick-and-place-on-the-machine/5845)

<div class="topic-metadata">

**Author:** [@Maggie](https://forum.visualcomponents.com/u/Maggie)\
**Replies:** 5\
**Last updated:** [May 20, 2026, 5:28pm UTC](https://forum.visualcomponents.com/t/how-to-implement-pick-and-place-on-the-machine/5845 "2026-05-20T17:28:23Z")

</div>

My robot has two handles. In machine 1, the priduce has been processed, and there is already a workpiece in from Conveyor. step1: one of the robot handlers(handle1) needs to grasp the part of from Conveyor first (Part 1…

---

## [Robot arm moving through FIFO rack when placing part on sink](https://forum.visualcomponents.com/t/robot-arm-moving-through-fifo-rack-when-placing-part-on-sink/9312)

<div class="topic-metadata">

**Author:** [@Mueller](https://forum.visualcomponents.com/u/Mueller)\
**Replies:** 0\
**Last updated:** [May 18, 2026, 1:52pm UTC](https://forum.visualcomponents.com/t/robot-arm-moving-through-fifo-rack-when-placing-part-on-sink/9312 "2026-05-18T13:52:28Z")

</div>

Hi everyone, I’m experiencing an issue with collision avoidance in my simulation and hoping someone can point me in the right direction. Setup: I have a process where a robot delivers parts to a sink The sink is plac…

---

## [Multiple product, multiple location milk run](https://forum.visualcomponents.com/t/multiple-product-multiple-location-milk-run/9311)

<div class="topic-metadata">

**Author:** [@Tomasz](https://forum.visualcomponents.com/u/Tomasz)\
**Replies:** 0\
**Last updated:** [May 18, 2026, 10:00am UTC](https://forum.visualcomponents.com/t/multiple-product-multiple-location-milk-run/9311 "2026-05-18T10:00:06Z")

</div>

Hello, I’d like to simulate a milk run with 4 carts, where I go in fixed order 2-3-4-5-6-7-8-9-1 and collect what is currently available (within cart limits) and deliver to each location (if possible). At the stations, …

---

## [AMR not pulling cart](https://forum.visualcomponents.com/t/amr-not-pulling-cart/9298)

<div class="topic-metadata">

**Author:** [@Tomasz](https://forum.visualcomponents.com/u/Tomasz)\
**Replies:** 2\
**Last updated:** [May 18, 2026, 5:01am UTC](https://forum.visualcomponents.com/t/amr-not-pulling-cart/9298 "2026-05-18T05:01:08Z")

</div>

I have a problem with the cart and AMR. I created simple mission: go to A, wait, go to B. AMR does that, but without the cart. All items (AMR, cart, mobile robot transport controller, mission controller) are the lates…

---

## [AGV Routing: Partial Unloading at Multiple Sinks in Partly Wrong Order](https://forum.visualcomponents.com/t/agv-routing-partial-unloading-at-multiple-sinks-in-partly-wrong-order/9295)

<div class="topic-metadata">

**Author:** [@Mueller](https://forum.visualcomponents.com/u/Mueller)\
**Replies:** 3\
**Last updated:** [May 13, 2026, 12:40pm UTC](https://forum.visualcomponents.com/t/agv-routing-partial-unloading-at-multiple-sinks-in-partly-wrong-order/9295 "2026-05-13T12:40:53Z")

</div>

Hello everyone, I’m working with Visual Components 4.10 and I’m having an issue with AGV control. My Setup: 3 AGVs (capacity: 6 parts each) 1 Source 3 Sinks (arranged clockwise: 12 o’clock, 3 o’clock, 6 o’clock posi…

---

## [Process Node Positions Corrupted After Reopening Layout (OneWayPath / One to Many)](https://forum.visualcomponents.com/t/process-node-positions-corrupted-after-reopening-layout-onewaypath-one-to-many/9300)

<div class="topic-metadata">

**Author:** [@Kwon](https://forum.visualcomponents.com/u/Kwon)\
**Replies:** 0\
**Last updated:** [May 12, 2026, 11:34am UTC](https://forum.visualcomponents.com/t/process-node-positions-corrupted-after-reopening-layout-onewaypath-one-to-many/9300 "2026-05-12T11:34:46Z")

</div>

Hello, forum users. I have a question regarding Process Nodes. I attached nodes to an empty modeling object (roller conveyor). For this setup, I used the following features: OneWayPath One to Many Initially, everyt…

[Previous page](https://forum.visualcomponents.com/c/process-modeling/25.md)

[Next page](https://forum.visualcomponents.com/c/process-modeling/25.md?page=2)
