# eCat Updates

**URL:** https://forum.visualcomponents.com/c/ecat-updates/17.md?page=1

[Latest](https://forum.visualcomponents.com/latest.md) · [Categories](https://forum.visualcomponents.com/categories.md)

**Page:** 2

---

## [Roundabout builder](https://forum.visualcomponents.com/t/roundabout-builder/8817)

<div class="topic-metadata">

**Author:** [@idkfa](https://forum.visualcomponents.com/u/idkfa)\
**Replies:** 3\
**Last updated:** [December 18, 2025, 9:39am UTC](https://forum.visualcomponents.com/t/roundabout-builder/8817 "2025-12-18T09:39:35Z")

</div>

One-click roundabout builder, it’s now available in 4.10 eCat

---

## [Intersections Controller](https://forum.visualcomponents.com/t/intersections-controller/8812)

<div class="topic-metadata">

**Author:** [@idkfa](https://forum.visualcomponents.com/u/idkfa)\
**Replies:** 0\
**Last updated:** [December 16, 2025, 8:03pm UTC](https://forum.visualcomponents.com/t/intersections-controller/8812 "2025-12-16T20:03:09Z")

</div>

Intersections controller is now available in 4.10 eCat There can be multiple intersections. Enters refer to the directions from which resources enter the intersections. You can swap Enters and Exits using the ‘Exchange…

---

## [Bosch Rexroth MPS Manual Workstations](https://forum.visualcomponents.com/t/bosch-rexroth-mps-manual-workstations/8803)

<div class="topic-metadata">

**Author:** [@Tilma](https://forum.visualcomponents.com/u/Tilma)\
**Replies:** 0\
**Last updated:** [December 15, 2025, 4:14pm UTC](https://forum.visualcomponents.com/t/bosch-rexroth-mps-manual-workstations/8803 "2025-12-15T16:14:59Z")

</div>

Four new Bosch Rexroth components were added to the 4.10 eCatalog! Two manual workstations (one with adjustable height), a material shuttle and an EcoFlow rack have been added in the “Manual Workstations” file in the eC…

---

## [Conveyor Direction Visualizer](https://forum.visualcomponents.com/t/conveyor-direction-visualizer/8781)

<div class="topic-metadata">

**Author:** [@idkfa](https://forum.visualcomponents.com/u/idkfa)\
**Replies:** 0\
**Last updated:** [December 8, 2025, 10:08am UTC](https://forum.visualcomponents.com/t/conveyor-direction-visualizer/8781 "2025-12-08T10:08:51Z")

</div>

Conveyor direction visualizer is now available in 4.10 eCat now.

---

## [5 new Kawasaki robots](https://forum.visualcomponents.com/t/5-new-kawasaki-robots/8752)

<div class="topic-metadata">

**Author:** [@KustiH](https://forum.visualcomponents.com/u/KustiH)\
**Replies:** 0\
**Last updated:** [November 27, 2025, 5:50am UTC](https://forum.visualcomponents.com/t/5-new-kawasaki-robots/8752 "2025-11-27T05:50:05Z")

</div>

5 new Kawasaki robots are available in 4.10 eCat: BA013L BA013N MC006V MXP360L MXP410X BA013L and BA013N were already published a few weeks ago. The rest were added now.

---

## [Yaskawa SDA series robots](https://forum.visualcomponents.com/t/yaskawa-sda-series-robots/8720)

<div class="topic-metadata">

**Author:** [@idkfa](https://forum.visualcomponents.com/u/idkfa)\
**Replies:** 0\
**Last updated:** [November 18, 2025, 11:14am UTC](https://forum.visualcomponents.com/t/yaskawa-sda-series-robots/8720 "2025-11-18T11:14:50Z")

</div>

Yaskawa SDA series robots are all available on 4.10 eCat now. SDA5F, CSDA10F, SDA10F, SDA20F, SDA10D

---

## [Advanced Feeder bug: Can only insert once](https://forum.visualcomponents.com/t/advanced-feeder-bug-can-only-insert-once/8674)

<div class="topic-metadata">

**Author:** [@BionicBoon](https://forum.visualcomponents.com/u/BionicBoon)\
**Replies:** 1\
**Last updated:** [October 31, 2025, 7:46am UTC](https://forum.visualcomponents.com/t/advanced-feeder-bug-can-only-insert-once/8674 "2025-10-31T07:46:05Z")

</div>

Hello all, I was playing around with the advanced feeder and noticed the following: When I import the Feeder for the first time after restarting VC (Professional 4.10), it loads correctly. However, the next time I try …

---

## [Planar Motor components](https://forum.visualcomponents.com/t/planar-motor-components/4940)

<div class="topic-metadata">

**Author:** [@Este](https://forum.visualcomponents.com/u/Este)\
**Replies:** 3\
**Last updated:** [October 30, 2025, 7:02am UTC](https://forum.visualcomponents.com/t/planar-motor-components/4940 "2025-10-30T07:02:29Z")

</div>

Today we have released new exciting components by Planar Motor Inc. The release has 13 Advanced Motion components, including 11 XBot movers, a Flyway stator, and a Controller. These components can be simulated in a s…

---

## [Ekobal components for packaging](https://forum.visualcomponents.com/t/ekobal-components-for-packaging/8655)

<div class="topic-metadata">

**Author:** [@keke](https://forum.visualcomponents.com/u/keke)\
**Replies:** 0\
**Last updated:** [October 29, 2025, 10:16am UTC](https://forum.visualcomponents.com/t/ekobal-components-for-packaging/8655 "2025-10-29T10:16:12Z")

</div>

We have added new manufacturer to 4.10 eCat. Ekobal provides solutions for packaging and now you can find some of their pallet magazines, conveyors and wrapping machines in our eCatalog. These models were provided to us …

---

## [Nachi ST210TP-01](https://forum.visualcomponents.com/t/nachi-st210tp-01/8583)

<div class="topic-metadata">

**Author:** [@keke](https://forum.visualcomponents.com/u/keke)\
**Replies:** 0\
**Last updated:** [October 8, 2025, 9:06am UTC](https://forum.visualcomponents.com/t/nachi-st210tp-01/8583 "2025-10-08T09:06:15Z")

</div>

We’ve added Nachi ST210TP-01 to 4.10 eCat. This is press tending robot with integrated 7th axis. In VC this is modeled with python kinematics. Similar to some other 7 axis models VC robot has 8th axis called “Swivel” whi…

---

## [Possibility of heat maps](https://forum.visualcomponents.com/t/possibility-of-heat-maps/7043)

<div class="topic-metadata">

**Author:** [@K.paul](https://forum.visualcomponents.com/u/K.paul)\
**Replies:** 10\
**Last updated:** [October 7, 2025, 12:14pm UTC](https://forum.visualcomponents.com/t/possibility-of-heat-maps/7043 "2025-10-07T12:14:38Z")

</div>

Do you think it will be possible to display heat maps in VC in the future? Where there is a lot of traffic, work etc. in red little in blue etc. and then display this for different things for people, forklifts, trucks…

---

## [Universal Robots UR15](https://forum.visualcomponents.com/t/universal-robots-ur15/8537)

<div class="topic-metadata">

**Author:** [@keke](https://forum.visualcomponents.com/u/keke)\
**Replies:** 0\
**Last updated:** [September 23, 2025, 12:33pm UTC](https://forum.visualcomponents.com/t/universal-robots-ur15/8537 "2025-09-23T12:33:15Z")

</div>

We have now added Universal Robots UR15 to 4.10 eCat. -k

---

## [New robot Franka Robotics Research 3](https://forum.visualcomponents.com/t/new-robot-franka-robotics-research-3/8492)

<div class="topic-metadata">

**Author:** [@aleksi\_sa](https://forum.visualcomponents.com/u/aleksi_sa)\
**Replies:** 0\
**Last updated:** [September 12, 2025, 12:33pm UTC](https://forum.visualcomponents.com/t/new-robot-franka-robotics-research-3/8492 "2025-09-12T12:33:36Z")

</div>

New robot Franka Robotics Research 3 now available at 4.10 eCat.

---

## [Mission Controller - Remote AMR Control via Redis](https://forum.visualcomponents.com/t/mission-controller-remote-amr-control-via-redis/7078)

<div class="topic-metadata">

**Author:** [@idkfa](https://forum.visualcomponents.com/u/idkfa)\
**Replies:** 15\
**Last updated:** [September 11, 2025, 3:24am UTC](https://forum.visualcomponents.com/t/mission-controller-remote-amr-control-via-redis/7078 "2025-09-11T03:24:17Z")

</div>

4.9 eCat update, ‘Mission Controller’ now supports Redis communication. You can remotely send messages to the Redis server, and once VC receives the message, it will immediately dispatch tasks to AMR, check RedisScript f…

---

## [Various parametric models added](https://forum.visualcomponents.com/t/various-parametric-models-added/8448)

<div class="topic-metadata">

**Author:** [@KustiH](https://forum.visualcomponents.com/u/KustiH)\
**Replies:** 0\
**Last updated:** [August 29, 2025, 12:10pm UTC](https://forum.visualcomponents.com/t/various-parametric-models-added/8448 "2025-08-29T12:10:54Z")

</div>

A few new models were added to 4.10 eCat. Robots \> Generic Cobot: Are you using a collaborative 6-axis robot that is not yet in eCatalog? Feel free to use this unbranded model in the meantime. The link lengths are para…

---

## [New Nachi robots](https://forum.visualcomponents.com/t/new-nachi-robots/8377)

<div class="topic-metadata">

**Author:** [@KustiH](https://forum.visualcomponents.com/u/KustiH)\
**Replies:** 0\
**Last updated:** [July 31, 2025, 10:57am UTC](https://forum.visualcomponents.com/t/new-nachi-robots/8377 "2025-07-31T10:57:06Z")

</div>

Two new Nachi robot models are now in 4.10 eCat: -MZ50LF -MZ35S -Kusti

---

## [Volume Detector for virtual commissioning](https://forum.visualcomponents.com/t/volume-detector-for-virtual-commissioning/8350)

<div class="topic-metadata">

**Author:** [@KustiH](https://forum.visualcomponents.com/u/KustiH)\
**Replies:** 2\
**Last updated:** [July 25, 2025, 9:32am UTC](https://forum.visualcomponents.com/t/volume-detector-for-virtual-commissioning/8350 "2025-07-25T09:32:24Z")

</div>

We have added a new sensor component to 4.10 eCatalog: Volume Detector in Misc category. The component sends a boolean signal when a component enters the volume, and there’s also a component signal interface for usin…

---

## [Dual Gripper Programming](https://forum.visualcomponents.com/t/dual-gripper-programming/8271)

<div class="topic-metadata">

**Author:** [@keke](https://forum.visualcomponents.com/u/keke)\
**Replies:** 0\
**Last updated:** [July 2, 2025, 11:33am UTC](https://forum.visualcomponents.com/t/dual-gripper-programming/8271 "2025-07-02T11:33:03Z")

</div>

There’s new layout template in 4.10 called “Dual Gripper Programming”. Layout shows how to use manual programming in machine tending with dual grippers. With PM transport controller there’s support for dual gripper but a…

---

## [EWAB Pallet Conveyor System](https://forum.visualcomponents.com/t/ewab-pallet-conveyor-system/8248)

<div class="topic-metadata">

**Author:** [@keke](https://forum.visualcomponents.com/u/keke)\
**Replies:** 2\
**Last updated:** [July 1, 2025, 4:31am UTC](https://forum.visualcomponents.com/t/ewab-pallet-conveyor-system/8248 "2025-07-01T04:31:00Z")

</div>

Hi, We have collaborated with EWAB to publish some of their pallet conveyor systems in our 4.10 eCatalog. PS800 consists of 20 components that you can use to create flexible pallet conveyor systems and simulate them. Yo…

---

## [ABB IRB 7720 series](https://forum.visualcomponents.com/t/abb-irb-7720-series/8264)

<div class="topic-metadata">

**Author:** [@KustiH](https://forum.visualcomponents.com/u/KustiH)\
**Replies:** 0\
**Last updated:** [June 27, 2025, 12:16pm UTC](https://forum.visualcomponents.com/t/abb-irb-7720-series/8264 "2025-06-27T12:16:32Z")

</div>

ABB IRB 7720 series heavy-payload articulated robots are now available in 4.10 eCat. -IRB 7720-620/2.9 -IRB 7720-530/3.1 -IRB 7720-510/3.3 -IRB 7720-450/3.5 -IRB 7720-560/2.9 LID -IRB 7720-480/3.1 LID -IRB 7720-40…

---

## [New Mitsubishi Scara Robots Added to 4.10 eCat](https://forum.visualcomponents.com/t/new-mitsubishi-scara-robots-added-to-4-10-ecat/8251)

<div class="topic-metadata">

**Author:** [@MSVC](https://forum.visualcomponents.com/u/MSVC)\
**Replies:** 0\
**Last updated:** [June 25, 2025, 11:19am UTC](https://forum.visualcomponents.com/t/new-mitsubishi-scara-robots-added-to-4-10-ecat/8251 "2025-06-25T11:19:19Z")

</div>

RH-10CRH 6020 RH-10CRH 6030 RH-10CRH 7020 RH-10CRH 7030 RH-10CRH 8020 RH-10CRH 8030 RH-20CRH 8542 RH-20CRH 10042

---

## [New robots from ABB, Yaskawa and Yamaha](https://forum.visualcomponents.com/t/new-robots-from-abb-yaskawa-and-yamaha/8239)

<div class="topic-metadata">

**Author:** [@keke](https://forum.visualcomponents.com/u/keke)\
**Replies:** 0\
**Last updated:** [June 18, 2025, 10:49am UTC](https://forum.visualcomponents.com/t/new-robots-from-abb-yaskawa-and-yamaha/8239 "2025-06-18T10:49:56Z")

</div>

VC’s ever-growing collection of robots has gotten some new items. Following robots have been added to 4.10 eCatalog: ABB IRB 5510-12 Yaskawa GG250 Yamaha YK250XGC-150 Yamaha YK350XGC-150 Yamaha YK400XGC-150 Yamaha YK50…

---

## [New component : Property Register](https://forum.visualcomponents.com/t/new-component-property-register/8233)

<div class="topic-metadata">

**Author:** [@Tilma](https://forum.visualcomponents.com/u/Tilma)\
**Replies:** 0\
**Last updated:** [June 16, 2025, 1:47pm UTC](https://forum.visualcomponents.com/t/new-component-property-register/8233 "2025-06-16T13:47:38Z")

</div>

The Property Register is in the Misc file of the eCat. It is used to change one or several properties common to different components before or during the simulation. For example you can change the dimension paramete…

---

## [New component: HMI Knob](https://forum.visualcomponents.com/t/new-component-hmi-knob/8200)

<div class="topic-metadata">

**Author:** [@emeritus](https://forum.visualcomponents.com/u/emeritus)\
**Replies:** 0\
**Last updated:** [June 2, 2025, 11:52am UTC](https://forum.visualcomponents.com/t/new-component-hmi-knob/8200 "2025-06-02T11:52:46Z")

</div>

Simple to use, interactable, HMI knob component added to the ecatalog. Component signals out boolean, real, interger and string type signals as the knob is turned. Connect to other components, use it with your custom py…

---

## [Generic Lift-and-Rotate Conveyor](https://forum.visualcomponents.com/t/generic-lift-and-rotate-conveyor/7655)

<div class="topic-metadata">

**Author:** [@KustiH](https://forum.visualcomponents.com/u/KustiH)\
**Replies:** 1\
**Last updated:** [June 2, 2025, 11:19am UTC](https://forum.visualcomponents.com/t/generic-lift-and-rotate-conveyor/7655 "2025-06-02T11:19:39Z")

</div>

A new generic lift-and-rotate conveyor has been published in 4.10 eCat under manufacturer Visual Components. This component stops and rotates products based on a routing rule. This component could be used in non-robotic…

---

## [New Rotator Conveyor](https://forum.visualcomponents.com/t/new-rotator-conveyor/4619)

<div class="topic-metadata">

**Author:** [@keke](https://forum.visualcomponents.com/u/keke)\
**Replies:** 2\
**Last updated:** [May 30, 2025, 6:12am UTC](https://forum.visualcomponents.com/t/new-rotator-conveyor/4619 "2025-05-30T06:12:55Z")

</div>

We’ve updated our Conveyor library with new Rotator Conveyor. This is useful component if you need to manipulate the orientation of products on conveyor line and you don’t want to use physics. Compared to old model the g…

---

## [Danobat DMTR-200-2900 and 220-2600](https://forum.visualcomponents.com/t/danobat-dmtr-200-2900-and-220-2600/8176)

<div class="topic-metadata">

**Author:** [@keke](https://forum.visualcomponents.com/u/keke)\
**Replies:** 0\
**Last updated:** [May 26, 2025, 12:19pm UTC](https://forum.visualcomponents.com/t/danobat-dmtr-200-2900-and-220-2600/8176 "2025-05-26T12:19:33Z")

</div>

Hi, 2 new Danobat robots have been added to 4.10 eCat. DMTR-200-2900 and DMTR-220-2600 are heavy-duty arms with 200kg and 220kg payloads. -k

---

## [Pathway Generator from 2D-Lines](https://forum.visualcomponents.com/t/pathway-generator-from-2d-lines/7552)

<div class="topic-metadata">

**Author:** [@ahven](https://forum.visualcomponents.com/u/ahven)\
**Replies:** 9\
**Last updated:** [May 24, 2025, 1:49am UTC](https://forum.visualcomponents.com/t/pathway-generator-from-2d-lines/7552 "2025-05-24T01:49:06Z")

</div>

New component published in the eCatalog 4.10: Pathway Generator from 2D-Lines (found under Navigation, manufacturer Visual Components). The component allows you to generate Pathways automatically from 2D lines. How to u…

---

## [Supertrak CONVEYANCE Horizon3 shuttle system](https://forum.visualcomponents.com/t/supertrak-conveyance-horizon3-shuttle-system/8149)

<div class="topic-metadata">

**Author:** [@KustiH](https://forum.visualcomponents.com/u/KustiH)\
**Replies:** 0\
**Last updated:** [May 22, 2025, 8:47am UTC](https://forum.visualcomponents.com/t/supertrak-conveyance-horizon3-shuttle-system/8149 "2025-05-22T08:47:02Z")

</div>

Hello. Components of Supertrak CONVEYANCE Horizon3 shuttle system are now published in 4.10 eCat, under collection Advanced Motion. This system can be operated in simulation mode (default), meaning that the shuttle…

---

## [Rokae robots and few other additions](https://forum.visualcomponents.com/t/rokae-robots-and-few-other-additions/8107)

<div class="topic-metadata">

**Author:** [@keke](https://forum.visualcomponents.com/u/keke)\
**Replies:** 0\
**Last updated:** [May 13, 2025, 6:55am UTC](https://forum.visualcomponents.com/t/rokae-robots-and-few-other-additions/8107 "2025-05-13T06:55:47Z")

</div>

We’ve added new manufacturer Rokae to 4.10 eCatalog. Our partner YHSTD modeled these three robots so big thanks to them. Besides Rokae there have some new models from ABB, Kuka and Nachi. Here are all the new models: A…

[Previous page](https://forum.visualcomponents.com/c/ecat-updates/17.md)

[Next page](https://forum.visualcomponents.com/c/ecat-updates/17.md?page=2)
