# Component Modeling

**URL:** https://forum.visualcomponents.com/c/component-modeling/11.md

[Latest](https://forum.visualcomponents.com/latest.md) · [Categories](https://forum.visualcomponents.com/categories.md)

---

## [About the Component Modeling category](https://forum.visualcomponents.com/t/about-the-component-modeling-category/19)

<div class="topic-metadata">

**Author:** [@system](https://forum.visualcomponents.com/u/system)\
**Replies:** 0

</div>

Questions regarding modeling and customizing components

---

## [Gripper PNP](https://forum.visualcomponents.com/t/gripper-pnp/9664)

<div class="topic-metadata">

**Author:** [@AndPas](https://forum.visualcomponents.com/u/AndPas)\
**Replies:** 1\
**Last updated:** [November 20, 2026, 10:54am UTC](https://forum.visualcomponents.com/t/gripper-pnp/9664 "2026-11-20T10:54:55Z")

</div>

Hello! I am having bit of an issue with modelling my gripper. I have two rotating joints on my gripper which I want to control individually and adjust 0…105 degrees. Right now I have configured gripper with Motion Contr…

---

## [Turn Table capacity](https://forum.visualcomponents.com/t/turn-table-capacity/9638)

<div class="topic-metadata">

**Author:** [@Tomasz](https://forum.visualcomponents.com/u/Tomasz)\
**Replies:** 9\
**Last updated:** [November 18, 2026, 7:25am UTC](https://forum.visualcomponents.com/t/turn-table-capacity/9638 "2026-11-18T07:25:01Z")

</div>

Hello everyone, I need a turn table with capacity 2. When one part comes in, it waits till the second one arrives, and only then the table turns. I tried to cook one, based on this video Model a Turn Unit | Visual Comp…

---

## [Rotating link/joint](https://forum.visualcomponents.com/t/rotating-link-joint/9643)

<div class="topic-metadata">

**Author:** [@AndPas](https://forum.visualcomponents.com/u/AndPas)\
**Replies:** 2\
**Last updated:** [November 13, 2026, 10:39am UTC](https://forum.visualcomponents.com/t/rotating-link-joint/9643 "2026-11-13T10:39:29Z")

</div>

Hello, community! I am a new user of Visual Components and I have a question about defining a custom link/joint. I want to make this part rotate (the blue line) around the axis of the hole (the purple line). What would …

---

## [Kuka cant control gripper](https://forum.visualcomponents.com/t/kuka-cant-control-gripper/9636)

<div class="topic-metadata">

**Author:** [@abtehnik](https://forum.visualcomponents.com/u/abtehnik)\
**Replies:** 0\
**Last updated:** [November 4, 2026, 11:55am UTC](https://forum.visualcomponents.com/t/kuka-cant-control-gripper/9636 "2026-11-04T11:55:18Z")

</div>

Hi everyone! strange situation - when i install kuka robot (kr210 r3100 ultra) and add gripper, kuka doesnt save movements of gripper. i change position of gripper parts and so on - but it doesnt show it when i run simul…

---

## [Dividing Parts with Physics](https://forum.visualcomponents.com/t/dividing-parts-with-physics/9601)

<div class="topic-metadata">

**Author:** [@Humanoid](https://forum.visualcomponents.com/u/Humanoid)\
**Replies:** 1\
**Last updated:** [October 9, 2026, 8:27am UTC](https://forum.visualcomponents.com/t/dividing-parts-with-physics/9601 "2026-10-09T08:27:39Z")

</div>

I want to modle this gateway where each part flips the gate so they can be dividet into two lanes. The whole idea is to recteate this Video https://www.youtube.com/watch?v=Nvsav6jLz-0. The only problem is that i have no…

---

## [MotionController V2 - Accessing Properties](https://forum.visualcomponents.com/t/motioncontroller-v2-accessing-properties/9529)

<div class="topic-metadata">

**Author:** [@mkrenkel](https://forum.visualcomponents.com/u/mkrenkel)\
**Replies:** 1\
**Last updated:** [August 28, 2026, 6:07am UTC](https://forum.visualcomponents.com/t/motioncontroller-v2-accessing-properties/9529 "2026-08-28T06:07:16Z")

</div>

Hi together, I’m modelling a component using the new MotionController and I’m using the “FromExpression” thing as the ValueSource. However, in the ValueExpression field I cannot access any Properties of the component. I…

---

## [\[Resolved\] How to Create a 360-Degree Continuous Loop Conveyor?](https://forum.visualcomponents.com/t/resolved-how-to-create-a-360-degree-continuous-loop-conveyor/9491)

<div class="topic-metadata">

**Author:** [@Kwon](https://forum.visualcomponents.com/u/Kwon)\
**Replies:** 4\
**Last updated:** [August 13, 2026, 8:51am UTC](https://forum.visualcomponents.com/t/resolved-how-to-create-a-360-degree-continuous-loop-conveyor/9491 "2026-08-13T08:51:50Z")

</div>

Hello, VC users, I would like to create a conveyor that rotates 360 degrees, as shown in the picture, where the conveyor continuously loops around. However, I was unable to achieve this using the Joint Types provided i…

---

## [Drawing View ignores Text feature rotation](https://forum.visualcomponents.com/t/drawing-view-ignores-text-feature-rotation/9472)

<div class="topic-metadata">

**Author:** [@kpr](https://forum.visualcomponents.com/u/kpr)\
**Replies:** 1\
**Last updated:** [August 12, 2026, 9:01am UTC](https://forum.visualcomponents.com/t/drawing-view-ignores-text-feature-rotation/9472 "2026-08-12T09:01:18Z")

</div>

I’m seeing an issue with Text feature when generating a Drawing View. Hierarchy in Modelling: Root └─ Switch └─ Transform └─ Text The user rotates the main component in Home/ Process tab. The Text feat…

---

## [Precise physics collider is not actually precise](https://forum.visualcomponents.com/t/precise-physics-collider-is-not-actually-precise/9483)

<div class="topic-metadata">

**Author:** [@RandyWild](https://forum.visualcomponents.com/u/RandyWild)\
**Replies:** 4\
**Last updated:** [August 5, 2026, 7:02am UTC](https://forum.visualcomponents.com/t/precise-physics-collider-is-not-actually-precise/9483 "2026-08-05T07:02:40Z")

</div>

Hello experts! I’m currently working on a flipping mechanism for boxes that uses an arc-shaped guide. Sounds simple enough, but I’m running into a weird issue in Visual Components 4.9.2. The boxes just won’t get close …

---

## [Three-axis robots drag chains](https://forum.visualcomponents.com/t/three-axis-robots-drag-chains/9479)

<div class="topic-metadata">

**Author:** [@victory](https://forum.visualcomponents.com/u/victory)\
**Replies:** 1\
**Last updated:** [August 4, 2026, 5:42am UTC](https://forum.visualcomponents.com/t/three-axis-robots-drag-chains/9479 "2026-08-04T05:42:20Z")

</div>

Hi All, our team design this three-axis robots, anyone know how to let the drag chains(Green highlight part) wrapping following the link joint? three-axis robots drag chains.vcmx (1.4 MB)

---

## [About the Ultra Light model](https://forum.visualcomponents.com/t/about-the-ultra-light-model/8121)

<div class="topic-metadata">

**Author:** [@BAD](https://forum.visualcomponents.com/u/BAD)\
**Replies:** 5\
**Last updated:** [August 3, 2026, 9:07am UTC](https://forum.visualcomponents.com/t/about-the-ultra-light-model/8121 "2026-08-03T09:07:35Z")

</div>

Hello everyone My team has recently made a number of large-scale environments for the bidding of some projects, including the whole beverage factory, docks, etc., and it is not going well in the VC, and the problem we o…

---

## [How to Implement Air Cylinder Kinematics](https://forum.visualcomponents.com/t/how-to-implement-air-cylinder-kinematics/9471)

<div class="topic-metadata">

**Author:** [@KIM](https://forum.visualcomponents.com/u/KIM)\
**Replies:** 0\
**Last updated:** [July 29, 2026, 7:23am UTC](https://forum.visualcomponents.com/t/how-to-implement-air-cylinder-kinematics/9471 "2026-07-29T07:23:50Z")

</div>

I’m trying to apply kinematics to an air cylinder so that it operates properly, but I haven’t been able to get it working. I would really appreciate your help. Cylinder.vcmx (580.6 KB)

---

## [Conveyor Chasing & Pickup Component](https://forum.visualcomponents.com/t/conveyor-chasing-pickup-component/9461)

<div class="topic-metadata">

**Author:** [@Devil](https://forum.visualcomponents.com/u/Devil)\
**Replies:** 1\
**Last updated:** [July 27, 2026, 6:32am UTC](https://forum.visualcomponents.com/t/conveyor-chasing-pickup-component/9461 "2026-07-27T06:32:21Z")

</div>

This custom component extends a standard Visual Components conveyor with robot chasing and pickup logic. It enables a robot to track and grasp moving parts directly on the belt without stopping the conveyor. The script u…

---

## [Versioning of Components](https://forum.visualcomponents.com/t/versioning-of-components/9447)

<div class="topic-metadata">

**Author:** [@konnikol](https://forum.visualcomponents.com/u/konnikol)\
**Replies:** 0\
**Last updated:** [July 21, 2026, 6:58am UTC](https://forum.visualcomponents.com/t/versioning-of-components/9447 "2026-07-21T06:58:18Z")

</div>

Hi everyone! I want to version my components so I can check if a layout is up to date on my custom components. Are there any tips for best practices and suggestions? I am thinking of using the Revision when I save the …

---

## [Break the link of component starts following another component's rotation](https://forum.visualcomponents.com/t/break-the-link-of-component-starts-following-another-components-rotation/9442)

<div class="topic-metadata">

**Author:** [@Suresh1](https://forum.visualcomponents.com/u/Suresh1)\
**Replies:** 3\
**Last updated:** [July 20, 2026, 10:26am UTC](https://forum.visualcomponents.com/t/break-the-link-of-component-starts-following-another-components-rotation/9442 "2026-07-20T10:26:54Z")

</div>

Hello everyone, I am facing a strange issue in Visual Components and would appreciate some help. I have a robot pick-and-place task where a 2-finger gripper picks a bearing and places it onto a 3 finger spindle. After …

---

## [Creating a tower crane](https://forum.visualcomponents.com/t/creating-a-tower-crane/5737)

<div class="topic-metadata">

**Author:** [@Shaydayuk](https://forum.visualcomponents.com/u/Shaydayuk)\
**Replies:** 14\
**Last updated:** [July 14, 2026, 7:44am UTC](https://forum.visualcomponents.com/t/creating-a-tower-crane/5737 "2026-07-14T07:44:17Z")

</div>

Hello, i’m new to modeling and I’ve run into a problem… I made a 3d model of a tower crane, but I can’t figure out what behavior and properties to give it to add it as a new component… Maybe someone knows how to do thi…

---

## [Grasping and releasing](https://forum.visualcomponents.com/t/grasping-and-releasing/9390)

<div class="topic-metadata">

**Author:** [@Kanta](https://forum.visualcomponents.com/u/Kanta)\
**Replies:** 1\
**Last updated:** [June 26, 2026, 1:05am UTC](https://forum.visualcomponents.com/t/grasping-and-releasing/9390 "2026-06-26T01:05:05Z")

</div>

i am teaching my robot to grasp and release to objects at once, one box and one lid on top of it, does not matter what volume i give to the grasp function, it is not collecting two objects together. with the same volume…

---

## [Setting up OLP](https://forum.visualcomponents.com/t/setting-up-olp/9362)

<div class="topic-metadata">

**Author:** [@Kanta](https://forum.visualcomponents.com/u/Kanta)\
**Replies:** 15\
**Last updated:** [June 16, 2026, 8:21am UTC](https://forum.visualcomponents.com/t/setting-up-olp/9362 "2026-06-16T08:21:37Z")

</div>

I am getting the following error message : KR 10 R1440-2: unable to INITIALIZE the RCS robot instance because initialiation parameters have not been set KR 10 R1440-2::RCS error: Could not load or initialize the RCS mod…

---

## [Using Multiple positioners](https://forum.visualcomponents.com/t/using-multiple-positioners/9368)

<div class="topic-metadata">

**Author:** [@Kanta](https://forum.visualcomponents.com/u/Kanta)\
**Replies:** 0\
**Last updated:** [June 15, 2026, 8:33am UTC](https://forum.visualcomponents.com/t/using-multiple-positioners/9368 "2026-06-15T08:33:59Z")

</div>

I have connected both the workpiece positioner, The external axis are connected with the robot properly. whenever i am trying make weld seems with arcweld path creation , i am getting the following message I …

---

## [Robot Dresspack](https://forum.visualcomponents.com/t/robot-dresspack/8900)

<div class="topic-metadata">

**Author:** [@mkeshav](https://forum.visualcomponents.com/u/mkeshav)\
**Replies:** 1\
**Last updated:** [June 8, 2026, 9:52am UTC](https://forum.visualcomponents.com/t/robot-dresspack/8900 "2026-06-08T09:52:49Z")

</div>

Hi Team I am facing the issue of clamping the robot dresspack at J4 axis, I am getting the option of directly snap to J6 Offset. i want my dresspack to be routed through J4 axis clamp and then attach to the J6 Offset. C…

---

## [How to move multiple components under 1 component to simplify layout](https://forum.visualcomponents.com/t/how-to-move-multiple-components-under-1-component-to-simplify-layout/9304)

<div class="topic-metadata">

**Author:** [@hans](https://forum.visualcomponents.com/u/hans)\
**Replies:** 2\
**Last updated:** [May 13, 2026, 12:55pm UTC](https://forum.visualcomponents.com/t/how-to-move-multiple-components-under-1-component-to-simplify-layout/9304 "2026-05-13T12:55:12Z")

</div>

I have a pallet with a bunch of components to indicate raw material feed in the layout. However, the amount of CAD data is making the layout heavy. How can I move all these separate components under one component and s…

---

## [Rotating Gripper](https://forum.visualcomponents.com/t/rotating-gripper/9281)

<div class="topic-metadata">

**Author:** [@hanslow](https://forum.visualcomponents.com/u/hanslow)\
**Replies:** 7\
**Last updated:** [May 8, 2026, 1:26am UTC](https://forum.visualcomponents.com/t/rotating-gripper/9281 "2026-05-08T01:26:33Z")

</div>

Hello, I am trying to model a Gripper that has a rotating functionality (not the robot) where the fingers would be subjoints of the rotary link, but i couldn’t find any eCatalog Gripper with the same patttern. I alread…

---

## [Problem with Interface for Robots](https://forum.visualcomponents.com/t/problem-with-interface-for-robots/5661)

<div class="topic-metadata">

**Author:** [@fabian.schueehle](https://forum.visualcomponents.com/u/fabian.schueehle)\
**Replies:** 1\
**Last updated:** [April 30, 2026, 3:42am UTC](https://forum.visualcomponents.com/t/problem-with-interface-for-robots/5661 "2026-04-30T03:42:07Z")

</div>

Hey together, i found out a Problem with the OneToOneInterfaces. i wanted to place Robots in our machines with the help of OneToOneInterfaces in our machines with Hierarchie Field to place the Robot. my Interfaces are in…

---

## [Forklift Transport with Inertia](https://forum.visualcomponents.com/t/forklift-transport-with-inertia/9251)

<div class="topic-metadata">

**Author:** [@gomez.j](https://forum.visualcomponents.com/u/gomez.j)\
**Replies:** 2\
**Last updated:** [April 24, 2026, 10:47am UTC](https://forum.visualcomponents.com/t/forklift-transport-with-inertia/9251 "2026-04-24T10:47:16Z")

</div>

Dear Community, I would like to try using the physics engine of Visual Components on mobile resources (Forklifts). I could not find any tutorials about it and the Template Layouts / Layouts in the e-catalog do not cove…

---

## [Bi-directional Conveyor](https://forum.visualcomponents.com/t/bi-directional-conveyor/9186)

<div class="topic-metadata">

**Author:** [@hanslow](https://forum.visualcomponents.com/u/hanslow)\
**Replies:** 2\
**Last updated:** [April 17, 2026, 8:58am UTC](https://forum.visualcomponents.com/t/bi-directional-conveyor/9186 "2026-04-17T08:58:34Z")

</div>

Hi everyone, I’m currently working in Visual Components Premium OLP 4.10 and trying to model a conveyor based on an imported CAD file (geometry only, no behaviors). I followed this VC Academ y tutorial on creating a t…

---

## [How can we build a kinematic model for an assistive arm](https://forum.visualcomponents.com/t/how-can-we-build-a-kinematic-model-for-an-assistive-arm/9213)

<div class="topic-metadata">

**Author:** [@qzmlqgj](https://forum.visualcomponents.com/u/qzmlqgj)\
**Replies:** 2\
**Last updated:** [April 17, 2026, 7:38am UTC](https://forum.visualcomponents.com/t/how-can-we-build-a-kinematic-model-for-an-assistive-arm/9213 "2026-04-17T07:38:39Z")

</div>

I’d like to consult with the experts: how can a kinematic algorithm model be established for this type of assistive arm structure? Could you please take a look? 9-Ra.vcmx (1.8 MB)

---

## [Behavior in Conveyor Curves](https://forum.visualcomponents.com/t/behavior-in-conveyor-curves/9125)

<div class="topic-metadata">

**Author:** [@FlorianOber](https://forum.visualcomponents.com/u/FlorianOber)\
**Replies:** 13\
**Last updated:** [April 14, 2026, 5:09am UTC](https://forum.visualcomponents.com/t/behavior-in-conveyor-curves/9125 "2026-04-14T05:09:58Z")

</div>

Hi all, i have a question about the VC Conveyor behaviors. If use a straight piece of conveyor, products arrange close after each. If this “batch” of products runs into a curve, it creates a distance. For my applicat…

---

## [Modelling a moving linear machine with a buffer](https://forum.visualcomponents.com/t/modelling-a-moving-linear-machine-with-a-buffer/9153)

<div class="topic-metadata">

**Author:** [@hans](https://forum.visualcomponents.com/u/hans)\
**Replies:** 3\
**Last updated:** [April 9, 2026, 2:25pm UTC](https://forum.visualcomponents.com/t/modelling-a-moving-linear-machine-with-a-buffer/9153 "2026-04-09T14:25:27Z")

</div>

I need to model the following scenario: There’s a machine where products slowly move in one axis through a working area, so there’s an input area, working area and output area. Machine is always moving at some slow rat…

---

## [Vacuum Gripper – Missing Signals / How to Control?](https://forum.visualcomponents.com/t/vacuum-gripper-missing-signals-how-to-control/9194)

<div class="topic-metadata">

**Author:** [@hanslow](https://forum.visualcomponents.com/u/hanslow)\
**Replies:** 2\
**Last updated:** [April 8, 2026, 10:57am UTC](https://forum.visualcomponents.com/t/vacuum-gripper-missing-signals-how-to-control/9194 "2026-04-08T10:57:17Z")

</div>

Hi everyone, I’m currently working in Visual Components Premium 4.10 and I’ve run into a question regarding vacuum grippers from the eCatalog. Unlike standard mechanical grippers, vacuum grippers don’t seem to have exp…

[Next page](https://forum.visualcomponents.com/c/component-modeling/11.md?page=1)
