Record a Simulation as a Video

Forum Forums Visual Components 4.0 Academy Record a Simulation as a Video

Be sure to read the Forum Rules and Guidelines before start using the Forum.

This topic contains 0 replies, has 1 voice, and was last updated by zesty zesty 2 months, 2 weeks ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #7925
    zesty
    zesty
    Moderator

    Warning: Cannot modify header information - headers already sent by (output started at /home/content/p3pnexwpnas10_data03/02/2844402/html/wp-content/plugins/visitors-online/visitors-online.php:340) in /home/content/p3pnexwpnas10_data03/02/2844402/html/wp-content/plugins/crayon-syntax-highlighter/crayon_wp.class.php on line 220

    If you are using 4.0.5 to complete the tutorial, there is a known issue when using a fly camera component that can cause a crash while recording the simulation as a video. You might also encounter this issue when using a script that animates camera movements during a simulation, e.g. useView() or a program defined in vcViewAnimator.

    A solution is to upgrade to 4.1. From there, you could use either the fly camera component, script, or the Camera Animator command found on the Home tab’s Camera ribbon group.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.