Physics Cable

Visual Components Essentials has been officially released, download link

Be sure to read the Forum Rules and Guidelines before start using the Forum.

This topic contains 3 replies, has 3 voices, and was last updated by  JobW 1 month, 3 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #2595

    JobW
    Participant

    Hi,

    VC 4.0 has some great physics options and there is even an option to create physics cables. However, this cable is round but I would like to have a square cable like this:¬†http://csimg.koopkeus.nl/srv/NL/29089758155769147/T/340×340/C/FFFFFF/url/25-x-77mm-kabel-sleep-ketting.jpg

    Is this possible to create a physics cable in this shape?

    Regards,

     

    #2614
    zesty
    zesty
    Participant

    Nope. The current iteration is just meant for simple cables that can be rendered using capsules.

    #3300

    AshKing
    Participant

    Hi,

    At present the Physics cable is limited to round cable shape.One thing you can try out is by using the Gudel travel track in the eCatalog which has a drag chain in its track.You can extract the same from it and use.

    I will look into it and see if i can come up with something..

    #3302

    JobW
    Participant

    Hi,

    That’s indeed the way I already have it but my machine has an X and a Y axis and at the Gudel travel track, it only has one axis.

    This means that the curve can be at different locations and can have a different angle.

    Regards,

     

     

     

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.