Exchange robot issues

Forum Forums Visual Components 4.0 Robot Programming Exchange robot issues

Be sure to read the Forum Rules and Guidelines before start using the Forum.

This topic contains 0 replies, has 1 voice, and was last updated by  gat4b 1 month, 4 weeks ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #8350

    gat4b
    Moderator

    Warning: Cannot modify header information - headers already sent by (output started at /home/content/p3pnexwpnas10_data03/02/2844402/html/wp-content/plugins/visitors-online/visitors-online.php:340) in /home/content/p3pnexwpnas10_data03/02/2844402/html/wp-content/plugins/crayon-syntax-highlighter/crayon_wp.class.php on line 220

    Sometimes you might want to exchange between robots and Visual Components does not allows you to do that. The reason is, you cannot exchange robots having different number of joints and it is not recommended to do so. For example if you try to exchange robots between ABB IRB 460 and Yaskawa MPL160.

    However, if you still want to exchange, for some reason, you can configure required number of “dummy joints” in the controller properties of MPL160. Here it’s two more. Once added you will see this,

    Now if you try to exchange the robots, the MPL160 will be highlighted yellow and you can exchange now.

     

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.